Publicité
Before Using the Cooker Hood
COMPONENTS:
EN
YOU WILL BE NEEDING THESE TOOLS FOR INSTALLATION
CAUTION: Before proceeding to the installation, check if items
are missing or damaged, contact the manufacturer.
Observe all governing codes and ordinances. Have a qualified
technician install the cooker hood. It is the installer's
responsibility to comply with installation clearances specified on
the model/serial rating plate. The manufacturer declines all
responsibility for improper installation and does not accept
responsibility for appliance warranty in the event of damage
caused by incorrect installation.
Part 1:
6 *40mm Screws
Part 2: Expansion Bolt
Part 3:
Steel Cable
Part 4: 1 :1 Installation Diagram X 1
Part 5: Installtion Manual
1.Protective Gloves
2.Spirit Level Ruler
3.Measuring Tape
X 4
Part 6: Hanging Plate
Part 7: Decorative Plate
X 4
X 4
Part 8: Cooker Hood Body X 1
Part 9: Carbon Filter
X 1
4.Double Sided Tape or Tape
5.Cross-Head Screwdriver Set
6.Electric drill and 8mm drill
6
X 1
X 1
X 2
(CBCF003)
Publicité
