GreenWorks STG403 Manuel D'opérateur page 3

1 Description............................. 4
1.1 Purpose...........................................4
1.2 Overview......................................... 4
2 Important safety
instructions............................ 4
3 Symbols on the machine.......5
4 Risk levels.............................. 6
5 Service.................................... 6
6 Environmentally safe
battery disposal..................... 6
7 Proposition 65........................ 7
8 Installation.............................. 7
8.1 Unpack the machine....................... 7
8.2 Attach the guard............................. 7
8.3 Attach the wheel............................. 7
8.4 Assemble the shaft......................... 8
8.5 Attach the auxiliary handle..............8
9 Operation................................ 8
9.1 Install the battery pack.................... 9
9.2 Remove the battery pack................ 9
9.3 Start the machine............................9
English
9.4 Stop the machine............................ 9
9.5 Adjust the length of the
cutting line.......................................9
9.6 Line cut-off blade............................ 9
9.7 Operation tips..................................9
9.8 Cutting tips ................................... 10
9.9 Change to the edging mode......... 10
10 Maintenance......................... 11
10.1 General information.......................11
10.2 Clean the machine........................ 11
10.3 Replace the spool......................... 11
10.4 Replace the cutting line................ 12
11 Transportation and
storage.................................. 12
11.1 Move the machine........................ 12
11.2 Store the machine.........................12
12 Troubleshooting...................13
13 Technical data...................... 14
14 Limited warranty.................. 14
15 Replacement parts...............16
3
EN