Intended Use Of The Machine; Technical Specifications - MSW -MHB-360-780 Manuel D'utilisation

15. Do not leave the load without supervision.
16. Never exceed the permissible lifting capacity.
17. Never store the machine with a payload attached to it.
18. Lift only one load at a time.
19. No modifications should be made to the machine
20. After completion of the operation, the machine must be secured against unauthorized use.
21. The machine must be regularly inspected and its damaged or worn out and torn parts must be
replaced with new ones by an authorized service.
22. If the load falls, there is a risk of death or injury.
23. If the lift table remains unused for a long period of time, make sure it is clean and free from stains and
that the platform is in the lowest position. Avoid contact with moisture, wipe dry if needed and grease
all articulated parts.
24. Always secure the load with a chain.
25. The device should only be used on a flat and level surface, with appropriate load bearing rating.
26. The load should always be correctly balanced. Follow motorcycle manufacturer's instructions for lifting
points.
27. Do not move / transport the lift table with a load on it! The lift table may be moved / transported only
without a load.
28. Keep limbs away from the operating area.
29. Do not modify the device. Do not use the device if any parts are deformed, damaged cracked or if
other faults occur which prevent correct operation.
30. Make sure all the bolts are securely tightened prior to use.
Failure to follow safety recommendations and instructions may result in serious injuries or death!
III. INTENDED USE OF THE MACHINE
The motorcycle lift is designed for lifting motorcycles. Do not use the lift table for any other purpose.
The user is responsible for any damages resulting from a non-conform use of the device!
IV. TECHNICAL SPECIFICATIONS
Product name Motorcycle lift
Model MSW-MHB-360-780 MSW-MHB-450-680
Art. No: 6314 6315
Maximum loading 360 450
(lbs/kg)
Maximum height (cm) 78 68
Minimum height (cm) 21 18
Weight (kg) 105 114
Table size (cm) 175x50 190x53
Ramp size (cm) 45x50 42x53
16
MSW-MHB-135 MSW-MHB-135-PRO
6316 6317
135 135
87 87
35 35
28 29
41x35 41x35
- -
Rev. 09.12.2016
Assembly diagrams:
MSW-MHB-360-780 (6314)
53 52 51 50 49 48 47
54
55
56
57
58
59
60
61
62
63
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
16 17 18 19
21 22
20
23
24 25 26
27 28 29 30
No. Description Quantity
1 Locking bar 1
2 Lifting arm 1
3 Roller 2
4 Lifting arm 1
5 Pin 1
6 Ø16 washer 2
7 Mandrel 2
8 Roller 2
9 Pump 1
10 Mandrel 2
11 Ø12 washer 2
12 Wheel 2
13 M16X90 bolt 1
14 Ø16 washer 1
15 M16 nut 1
Rev. 09.12.2016
46
44 45
41
42
43
40
37
38
39
5
31 32 33 34 35 36
No. Description
16 Spring
17 Oil discharge elements
18 M16 bolt
19 Release lever elements
20 M5X10 bolt
21 M10x40 bolt
22 M10 nut
23 Spindle
24 M16X45 bolt
25 Ø16 washer
26 M16 nut
27 Ø16 washer
28 M6X10 bolt
29 Wheel
30 Bottom support
Quantity
1
1
1
1
1
1
1
1
2
2
2
8
8
2
2
17