Publicité
prevent the unit from maintaining proper cooling, increase
power
components.
● Place your unit on a floor strong enough to support the
weight of the fully filled unit.
● Make sure the unit is level by adjusting the front feet
underneath the unit. Make sure that the appliance rests on
its feet in a stable manner.
● Install the appliance away from direct sunlight and heat
sources (radiator, hot plate, etc.). Direct sunlight can damage
the unit's coating and heat can increase its power
consumption. If the ambient temperature is extremely cold
or hot, this may prevent the unit from operating properly.
● The unit is not designed to be installed in a basement or
cooler.
● This unit is designed exclusively for indoor use.
Caution: Make sure that the unit is kept away from any
substance that may cause combustion.
● Check that the water tank is in place before connecting the
unit.
CLEANING AND MAINTENANCE
Cleaning your appliance
● Unplug your appliance and take out all the bottles.
consumption
and
overheat
the
electrical
Publicité
