Publicité
The noise may come from the circulation fan, check that
nothing is interfering with its operation.
INSTALLATION INSTRUCTIONS
Before putting your appliance into service
● Remove all inner and outer packaging components.
● This appliance is designed to be free standing.
● Before connecting your device to a power supply, allow it to
stand upright for about 2 hours. This reduces the risk of
malfunction of the refrigeration system due to handling
during transport.
● Clean the inner surfaces of the unit with a soft cloth and
warm water.
● Leave 10cm of free space between the back and sides of the
unit to allow for ventilation of the cooling system. Failure to
do so will result in poor cooling performance, dust build up
on the components and dramatically shorten the life of the
product. It may also void the warranty.
Below are the guidelines for creating proper ventilation
Ventilation basics: While the unit is cooling(removing the
heat)from its interior, the removed heat is being dissipated
through the condenser coil at the rear of appliance. This heat
must be removed with proper air circulation and exhausted
to the outside of the cabinet enclosure. If this is not done,
excessive heat will build up inside the cabinet enclosure and
Publicité
