Publicité
Plug the heater cable to connect: "HEAT" port of the BMS and the "HEAT" port of the series box.
6
Groove
Rotating
ring
Turn the rotating ring to keep the arrow on it and the arrow on the connector body in a straight line, and then align
to the port's groove to plug the heater cable. Finally, rotate the rotating ring clockwise to tighten it.
Step 1: Connect grounding cable to the series box;
Step 2: Plug the positive power cable to connect: "A" port of the BMS and the "A" port of the series box;
Step 3: Plug the negative power cable to connect: "B" port of the BMS and the "B" port of the series box;
Step 4: Plug the communication cable to connect: "COM B" port of the BMS and "COM B" port of the series box.
7
92
BAT+
B -
AT
HEAT port
Arrows shall
be aligned to
the groove.
Connector
body
Communication cable (COM B port)
BAT+
B -
AT
Grounding cable
HEAT
A
BMS
COM B
HEAT
Heater cable
Rear side of BMS
CAUTION!
Groove
Power cable (+)
A
BMS
COM B
HEAT
Rear side of BMS
B
HEAT port
Rotating
ring
Connector
body
Click
B
Power cable (-)
Publicité
