Publicité
5. Selecting the Intensity (Dimming) Mode: To adjust the output
intensity, you must activate the Chase Dimmer Mode. Of course, only
when in the Chase Mode as in step 1, press and hold the
« MENU » button until « D » followed by three digits appears in the
LED. «D» stands for the chase dimmer.
6. Setting your desired Intensity: Use the « UP » and « DOWN »
arrow buttons to adjust the light output intensity from 000 ~ 100. A
set value of 000 will give you the weakest output intensity and a set
value of 100 will give you the full intensity.
7. Technical specifications
Power Thru/Input
Fuse
Maximum Power
Source
Weigh
Dimension
User Manual - FUNSTRIP 180 LH
AC 230V, 50Hz, Max 16A
F2A 250V 5*20mm
100W
10*18W LED 1600K to 3000K
5.4Kg
100(L)*7.8(W)13*(H)cm
V1.1 05/2022
D:000
D:000
9/28
Publicité
