Publicité
3. Main Features
• 01,02, 02, 04, 05, 10, 10, 20, 15, 25 DMX Channels selection
• Standard DMX 5-pin In/Out
• 16 built-in programs except for Auto & Full subject to Speed and Dimmer
• 0-100% dimming level
• Standard DMX-512 protocol / RDM
• 01 Thru 99 Chase Speed adjustment
• Power failure memory
• LED display window-4 digits Segment Display shows current activity and function state
• On/Off switch
• Fuse protection
4. Installation & Mounting
Before use, make sure whether four screws are secured firmly, if not, please secure them
with the screwdriver.
The unit has also been designed to hold up as user's desire. So you can fix the unit on the
holder by the wing screw. They are placed in the accessoty bag, included. The following
installation diagrams are for user reference.
Attention:
Do not attach more than 4 Funstrip 180 LH using the holes provided plates, suspended on the
two attachment points higher (insert M10).
Please note once this unit is for hancing application, it required to use a safety rope (sold
separately, this safety rope should hold at least 10 times the weight of fixture) to ensure the
mounting safety of the fixture by attached through the holder.
User Manual - FUNSTRIP 180 LH
V1.1 05/2022
5/28
Publicité
