Publicité
EN
other appliances with high cumulative power
requirements are connected to the same electrical
circuit. You can avoid tripping the circuit breaker by
setting the appliance on low power before switching on
and then increasing the power later.
DESCRIPTION
1
Vacuum cleaner lid
2
Lid release button
3
Carrying handle
4
Bumper
5
Power cord rewind pedal
6
ON/OFF pedal
7
Parking position
8
Wheels
9
Multi-directional wheel
10
Suction inlet
11
Dust compartment
a –
Fine dust compartments
b –
Main compartment
12
Maximum fill level for dust compartment
13
Dust compartment housing
14
Air/dust separation system
a –
Cone separator
b –
Air/dust divider
c –
Separation compartment
15
HEPA filter (Ref. ZR902501)
16
Filtration capsule:
a –
Black foam filter
b –
Microfilter
USING FOR THE FIRST TIME
1 • Unpacking
Unpack your appliance and remove any labels, keep your
guarantee form and read the instructions carefully before
using your appliance for the first time.
2
•
Recommendations
precautions
Each time before use, unwind the power cord completely.
Do not pinch it and do not allow it to rub against sharp
edges.
If you are using an electrical extension, check that it works
properly and that it is suited to the power of your vacuum
cleaner. Do not unplug the appliance by pulling on the
power cord.
Do not move the vacuum cleaner by pulling on the power
cord, the appliance must be moved using its carrying
handle.
* Depending on models: either equipment specific to cer-
tain models or available as an optional accessory.
3 • Repairs
Repairs should only be carried out by specialists using
original replacement parts.
Repairing an appliance oneself can be dangerous for
the user, and will invalidate the guarantee.
17
ERGO COMFORT SILENCE hose with grip
a –
Ergonomic ERGO COMFORT SILENCE grip*
b –
Manual power control (POWERCONTROL)
c –
Integrated furniture brush (EASY BRUSH)
18
ERGO COMFORT SILENCE metal telescopic tube
a –
Grip/tube locking system (LOCK SYSTEM)
b –
Tube adjustment button (TELESCOPIC
SYSTEM)
19
2-position nozzle (hard flat floors- carpet)
a –
Tube/nozzle locking system (LOCK SYSTEM)
b –
2 position button: brush in retracted position
for rugs and carpet / brush in advanced posi-
tion for parquet and hard flat floors
20
Parquet nozzle Delta
21
Hard flat floors nozzle*
22
Hard flat floors nozzle with removable brush*
a –
use on hard flat floors with crevices
a –
use on fragile hard flat floors
23
Mini turbo-brush nozzle*
24
Maxi turbo-brush nozzle*
25
Telescopic crevice nozzle*
26
Upholstery nozzle*
27
Accessory support*
Do not use the power cord or the hose to lift the appliance.
Switch off and unplug your vacuum cleaner after each use.
Always switch off and unplug your vacuum cleaner before
maintenance or cleaning.
Your vacuum cleaner is fitted with a safety device which
and
prevents the motor from overheating. In certain cases
(when used on chairs, sofas, etc.) the safety device may be
tripped and the appliance may make an unusual noise that
is not serious.
Only use original Rowenta accessories and filters.
Check that all the filters are in place.
Do not operate your vacuum cleaner without the filtration
system fitted (foam, microfilter and filter).
Never place the foam and microfilter in the appliance unless
they are completely dry.
If you have any difficulties in finding accessories or filters for
this vacuum cleaner, contact Rowenta Customer Services.
8
Publicité
