HoMedics FM-TS9-EU Mode D'emploi page 2

PRODUCT FEATURES
POWER BUTTON
INSTRUCTIONS FOR USE:
Always ensure the appliance is set to the 'OFF' before inserting the
plug into a mains outlet.
1. Plug the appliance into a 220-240V mains outlet and switch on.
2. Place the massager on the floor in front of your chair.
3. To activate the massage, press the 'Power' button once.
4. Position your feet over the rotating massage heads, applying
a level of pressure that feels comfortable for you. It is highly
recommended that this appliance is used with socked feet.
5. To activate heat with the massage, press the 'Power' button a
second time.
6. To switch off, press the 'Power' button till the massage heads
stop moving.
NOTE:
• DO NOT attempt to stand on this Foot Massager. Use only while
seated.
• The Heat function will only work when the massage is in use.
• DO NOT use the massage or heat functions continuously for
more than 15 minutes.
MAINTENANCE:
Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only
with a soft, slightly damp sponge.
• Never allow water or any other liquids to come into contact with
the appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish,
paint thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place.
To avoid breakage, DO NOT wrap the power cord around the
appliance. DO NOT hang the unit by the cord.
GB
2 I
MOVING MASSAGE HEADS