Publicité
3. Proper use
The chainsaw is intended for felling trees and for
cutting trunks, branches, wooden beams, boards
etc. and can be used for cross cuts and longitudi-
nal cuts. It is not suitable for cutting any materials
other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
4. Technical data
Motor power supply: ............................... 36 V DC
Idle speed n
: ........................... max. 10500 min
0
Cutting speed at rated rpm: .............. max. 19 m/s
Oil tank capacity: .......................................230 ml
Weight with cutter rail + chain + battery (5.2 Ah):
....................................................... approx. 6.8 kg
Net weight
(without rechargeable batteries) .... approx. 4.7 kg
Battery and charger
Please use only batteries and chargers from the
Power-X-Change series, e.g. 1.5Ah and 5.2Ah
batteries and the 3A Power-X charger.
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 62841-1 and EN 62841-2-13.
L
sound pressure level ..................... 92.7 dB(A)
pA
K
uncertainty ............................................. 3 dB
pA
L
sound power level ...................... 100.7 dB(A)
WA
K
uncertainty ........................................ 2.95 dB
WA
L
sound power level guaranteed ....... 105 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Anl_GP_LC_36_40_Li_BL_SPK13.indb 24
Anl_GP_LC_36_40_Li_BL_SPK13.indb 24
GB
Total vibration values (vector sum of three direc-
tions) were determined in accordance with EN
62841-1 and EN 62841-4-1.
Handle under load
Vibration emission value front handle
a
= 1.47 m/s
2
h
Vibration emission value rear handle
a
= 1.97 m/s
2
h
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
-1
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the equipment
Warning!
Always remove the battery pack before making
adjustments to the equipment.
Danger! Do not fi t the battery until the chainsaw
has been fully assembled and the chain tension
has been set. Always wear protective gloves
when working on the chainsaw to protect yourself
against injury.
- 24 -
2
23.05.2024 07:33:41
23.05.2024 07:33:41
Publicité
