Publicité
Troubleshooting
Problem
Does not dry
dishes well.
Has a bad odor.
40
English
DW0009_IB_DW7000KM_English.indd 40
Possible cause
There is no rinse aid
in the dispenser or not
enough rinse aid was
used.
The temperature of the
water is low when the
dishwasher is running.
Too many dishes have
been loaded.
Glasses and cups with
concave bottoms hold
water. This water may
spill onto other items
when you unload.
Auto Release™ Dry is
turned off.
Multiple detergent
tablets were used
without selecting the
Sanitize option.
Water was left over from
an incomplete cycle.
The Drain Hose is
obstructed.
The dishwasher is not
used daily or soiled
dishes are left in unit too
long.
Solution
• Check the dispenser and add rinse
aid.
• Use a liquid type rinse aid.
• Check the rinse aid settings.
• Connect the water supply line to a hot
water supply.
• Use rinse aid with the Sanitize option.
• Proper loading of items can affect
drying.
• Load your dishes as recommended.
(See page 14.)
• After inishing the cycle, empty the
lower rack irst and then the upper
rack. This will prevent water dripping
from the upper rack onto the dishes
in the lower rack.
• Turn Auto Release™ Dry on.
• Select the Sanitize option or use rinse
aid.
• Clean the dishwasher by running the
Heavy cycle with the dishwasher
empty and no detergent.
• Contact a qualiied service technician
to remove any obstruction from the
drain hose.
• With the dishwasher empty and no
detergent, place a glass with 8 ounces
of vinegar upright into the lower rack,
and then run a Heavy cycle.
2024-03-04( )
7:02:29
Publicité
