Publicité
Troubleshooting
Information codes
The Control Panel displays information codes to help you understand what is occurring
with your dishwasher.
Code
Leakage check / Overlow check
• If a leak occurs on the water supply valve connection, close the water
LC
• After closing the water supply valve, check if there is any drainage
Water supply check.
• Check if the water supply valve is closed or clogged, or is frozen. Also
4C
Drain check.
• After closing the water supply valve, check whether the drain hose is
5C
High temperature heating check.
• Functional check. With the dishwasher empty, add detergent, and then
HC
Pump operation check.
3C
• Functional check. Turn off the dishwasher and try to start it again.
Zone wash function check.
PC
• Functional check. Turn off the dishwasher and try to start it again.
42
English
DW0009_IB_DW7000KM_English.indd 42
supply valve and go to your house circuit breaker panel, set the
dishwasher's circuit breaker switch to off, and then contact the installer
to ix.
If the problem continues, contact an authorized Samsung service center.
problem or leak problem.
check if the supplied water pressure is less than required.
If the problem continues, close the water supply valve, and then contact
an authorized Samsung service center.
clogged or folded. Also, check whether the drain hole inside the sump is
clogged.
If the problem continues, contact an authorized Samsung service center.
run a cycle. If the problem continues, go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to off, and then contact
an authorized Samsung service center.
If the problem continues, contact an authorized Samsung service center.
If the problem continues, contact an authorized Samsung service center.
Action
2024-03-04( )
7:02:29
Publicité
