Publicité
Problem
Is too noisy.
Does not have a
smoothly rotating
nozzle.
Water won't
pump out of the
dishwasher.
Has a bent upper
rack after dishes
are loaded.
Cannot close the
door.
DW0009_IB_DW7000KM_English.indd 41
Possible cause
Sound is generated when
the dispenser cover is
open and the drain pump
is operating in an early
stage.
The dishwasher is not
leveled.
Foreign material (a screw,
a plastic piece) is in the
pump chamber.
There is a 'chopping'
sound because a nozzle
is bumping against the
dishes.
Less water than required
is supplied.
Nozzle holes are clogged
with food particles.
The nozzle is blocked by
a dish or pot and cannot
rotate.
The drain is clogged.
The dishes are not loaded
properly.
Auto Release™ Dry mode
is in operation.
Solution
• This is normal operation.
• Ensure the dishwasher is leveled
properly.
• Contact a qualiied service technician
to remove foreign material from the
pump chamber.
• Rearrange the dishes.
• Check if the supplied water pressure
is between 20 and 120 psi (between
140 and 830 kPa).
• Clean the nozzle holes. (See page 33.)
• After placing the dishes into the
racks, rotate the nozzles by hand
to check whether any of the dishes
interfere with them.
• Contact a qualiied service technician
to remove any obstruction from the
drain hose and check the drain pump
operation.
• Load your dishes as recommended.
(See page 14.)
• Once the door opens in the
Auto Release™ Dry mode, the door
cannot be closed manually for the
next 2 minutes. You may close the
door after 2 minutes.
English
41
2024-03-04( )
7:02:29
Publicité
