Publicité
STEP 10
Installing the Hood
Method 1: Attaching the unit to the wall
• The following drawings show the mounting dimensions
of the 30 in. (750 mm).
• Mark or drill 4 small holes on the mounting position
according to the dimensions on Fig #14.
• Insert 4 drywall anchors into the holes, and 2 screws
into the top holes.
• Hang the range hood onto the screws.
• Open the filter and install the inner panel in place with
safety screws.
• Attach the ducting to the damper and exhaust
outdoors (Fig #15).
Method 2: Attaching the unit to under kitchen cabinets
• Mark or drill 4 small holes on the mounting position
according to the space and dimensions cited on the
following image (Fig #16).
• Install 4 screws.
• Open the filter, align the hole of hood to the screws, then
tighten the screws.
• The following drawings show the mounting dimensions of
the 30 in. (750 mm).
Duct from top
Installation
Duct from back
Fig #17
Duct from top
— 15 —
Fig #14
Duct from back
Fig #15
Fig #16
Publicité
