Publicité
Installation instructions
1.2. Foundation
The following foundation elements have proven themselves in practice:
• Foundation slab (base plate)
• Strip foundation
For both types, a foundation that is absolutely flat and load-bearing must be
ensured. Only then can the assembly of the outdoor sauna be ensured without
any difficulties and with a precise fit.
We recommend using tar tape (moisture barrier) between the base wood and
the concrete to prevent moisture from penetrating the wood.
1.3. Anchoring the outdoor sauna
The outdoor sauna must be firmly anchored on the base plate or the strip
foundation. Strong winds can exert a powerful force on the garden sauna. To
prevent damage to your, or third party, property proper anchoring is essential.
We point out that anchoring the garden sauna is the responsibility of the
customer and we do not accept any liability for accidental damage.
1.4. Tools required
● Hammer with a wooden block and a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Drill bits with a diameter of 4 mm, 5 mm, 6 mm, 20 - 30 mm (for sauna heater
power cable)
● Spirit level
● Utility knife
● Ladder
● Saw
p. 4/41
Publicité
