Publicité
the risk of starting the tool accidentally .
Inserting and Removing
the Battery Pack
mended in the battery/charger list, included
with your tool. Use of any other types of bat-
teries may result in personal injury or property
damage .
battery pack. Inserting the battery pack into
power tools that have the switch on invites
accidents .
To Insert the Battery Pack
(Fig. 3)
1 . Set Trigger Lock 2 to the locked position .
2 . Slide charged Battery Pack 4 into the
housing until the battery pack locks into
position .
Your tool is equipped with a secondary lock-
ing latch to prevent the battery pack from
completely falling out of the handle, should
it become loose due to vibration .
To Remove the Battery Pack
(Fig. 4)
1 . Press the Battery Pack Release Button
5 and slide the Battery Pack 4 from the
housing .
2 . Press the Battery Pack Release Button 5
again and slide the Battery Pack 4 com-
pletely out of tool housing .
Inserting and Removing
Accessories
(Fig. 5)
Attach only high quality impact ready acces-
sories with the proper size square drive de-
signed for use with impact wrenches .
Your tool is equipped with with a 3/8" square
drive 1 with friction ring .
To install a socket 9, simply push completely
onto output drive 1 .
1605A002DT GDS18V-230C 202404.indd 13
page heading
Assembly
Disconnect battery pack from tool before making any assembly, adjust-
ments or changing accessories. Such preventive safety measures reduce
Use only Bosch or AMP-
Share batteries recom-
Ensure the trigger lock is
engaged before inserting
Fig. 3
4
Fig. 4
5
4
Fig. 5
(9)
To remove, simply pull socket off the output
drive .
(1)
13
4/15/24 8:26 AM
Publicité
