Publicité
Use
Using the product
Turn the retaining screws
clockwise direction. Clamp the item to be repaired with
the alligator clips
Move the On / Off switch
switch on the LEDs
Note: The LED bulbs
Point the precision engineer's LED magnifying glass
with the LED lamps
Release the alligator clips
work piece.
Move the On / Off switch
switch off the LEDs
Changing the batteries
Pull the battery compartment cover
the arrow to remove it from the battery compartment
Use the ribbon to remove the old batteries.
Place the new batteries
the battery compartment
Note: Ensure the correct polarity. This is shown in the
battery compartment
Push the battery compartment cover
opposite direction to the arrow back in order to close the
battery compartment
14 GB/IE/NI
on the alligator clips
19
in the repair device
18
into position "ON" to
9
.
20
are non-replaceable.
20
at the clamped work piece.
20
in order to remove the
18
into position "OFF" to
9
.
20
of type 1.5 V
21
.
4
.
4
.
4
18
.
15
in the direction of
3
, AAA into
back in the
3
in a
1
.
4
Publicité
