Focal FLAX EVO Manuel D'utilisation page 13

FLAX EVO™ SUBWOOFERS
U s e r m a n u a l
is available to fit the speakers into the vehicle (cf plans on the
packaging), then proceed with the cutting. In the case of assembly
in original location, check that there is enough space between the
speaker and the protection grilles.
• Ensure the speaker is clean from debris and metallic particles
that may be attached (especially after drilling).
• Clean before mounting the speakers.
The performance of the P 20 FE, P 25 FE, P 20 FSE and P 25 FSE
subwoofers allows high sound pressure levels to be generated.
We remind you that sustained listening beyond 85dB
SPL can permanently and irreversibly damage your
hearing. We recommend that you adjust the level of your
equipment correspondingly.
Running period
P 20 FE, P 25 FE, P 20 FSE and P 25 FSE drive units use the very
latest components. To ensure such complex mechanical elements
work in harmony with each other, they must be allowed to function
correctly in this environment. Changes in temperature and humidity
are regarded as very hostile. In order to get the best of your
speakers, a running-in period must be respected to ensure they
are ready for this. We recommend that, once the system is ready
for listening, the drive units should be run-in with medium volume
setting, with music that has the full bandwidth of frequencies
(sub-bass through treble). This running-in period should last for
a few weeks, to gain the full potential. After which the excellent
performance of your P 20 FE, P 25 FE, P 20 FSE and P25 FSE
subwoofers can be fully appreciated.
13