To fill the Water pitcher
Untitled-3 61
1. Grasp a handle groove of the lid, and
then pull up to open the lid.
2. Put tea leaves or fruit to your taste into
the infuser.
NOTE
If you want to keep the infused water in
its initial concentration, turn the AutoFill
Pitcher function off.
3. Enable the AutoFill Pitcher function on
the control panel. Open the Beverage
Center door, and then mount the water
pitcher onto the holder. Push it straight
in as shown in the figure.
CAUTION
Make sure the water pitcher fits in the
water pitcher holder.
4. Close the door. The water pitcher will
start to fill with chilled water a short
time later.
5. To drink tea, open the Beverage Center
door, and then detach the water pitcher.
Pull it straight out.
English
61
2023-04-10
11:07:29