Publicité
EN
How to check the appliance is connected to the gas supply in a sound fashion
•
It is important that all gas connections have been correctly connected to prevent any gas leaks.
•
The correct way is to smear the joint, i.e. where the gas container connects to the appliance, with soapy water. Turn the appliance control knob
slightly anti-clockwise to turn the gas on. If bubbles form, then there is a gas leak. Immediately turn the gas off and disconnect the gas supply
from the appliance. Check that all the connections are properly fitted. Check that the seal is in place and in good condition before connecting
the gas supply. Re-check with soapy water after refitting the gas supply.
•
If a gas leak persists, return the product to your local dealer for inspection/repair.
Country of use
Appliance Catagories
Allowable gases and
operating pressure
Nominal usuage
Gross nom. heat input
Jet number
a)
b)
AE = United Arab Emirates
CZ = Czech Republic
FR = France
JP = Japan
PT = Portugal
SK = Slovakia
I 3B/P (30), I 3+ (28-30/37) and I 3B/P (37), Appliance categories: (DK, FI, NO, NL, SE, AT, DE, BE, ES, FR, IE, IT, PT, GB, CH)
Push an approved hose onto the valve tailpiece until it is properly seated. On the other end, attach a suitable low pressure regulator.
I3B/P(30) : 30mbar Butane configurations regulator or 30mbar Propane configurations regulator or 30mbar butane/propane mixture
configuration regulator.
I3B/P(37) : 37mbar Butane configurations regulator or 37mbar Propane configurations regulator or 37mbar butane/propane mixture
configuration regulator.
I3+(28-30/37) : 30mbar Butane configurations regulator or 37mbar Propane configurations regulator.
Again making sure that the hose is properly seated. The type of hose used shall comply with the relevant EN standard and locate
requirement.
I 3B/P (50) Appliance category: (AT, DE)
I3B/P(50) : 50mbar Butane configurations regulator or 50mbar Propane configurations regulator or 50mbar butane/propane mixture
configurations regulator.
Screw a hose with the correct threaded fittings on each end, onto the left hand 1/4" BSP thread of the valve (M). Attach a suitable 50mbar
low-pressure regulator on the end of the hose. The hose assembly used must comply with DIN 4815 part 2 or equivalent.
DK, FI, NO, NL, SE, AT,
DE, SI
I3B/P (30)
Butane @ 28-30mbar
Propane @ 28-30mbar
Butane/Propane mixtures
@ 28-30mbar
Butane - 218 grams/hour
3kW
85
A refillable gas container not exceeding 11kg and complying with local regulation in force.
CA 445/CA 500 Cadac or equivalent EN417 compliant disposable cartridge with CADAC Power Pak 500.
Country Name and Abbreviations
AL = Albania
DE = Germany
GB = United Kingdom
KR = Korea
RO = Romania
SE = Sweden
PRODUCT No. 8309
BE, ES, FR, IE, IT, PT,
GB, CH
I3+ (28-30/37)
Butane @ 28-30mbar
Propane @ 37mbar
Butane/Propane mixtures
Butane - 218 grams/hour
Butane - 218 grams/hour
3kW
Gas supply sources:
AT = Austria
BE = Belgium
DK = Denmark
ES = Spain
GR = Greece
HR = Croatia
NL = Netherlands
NO = Norway
RU = Russia
RS = Serbia
TR = Turkey
ZA = South Africa
2 2
PL
I3B/P (37)
Butane @ 37mbar
Propane @ 37mbar
Propane @ 50mbar
Butane/Propane mixtures
@ 37mbar
Butane - 218 grams/hour
3kW
81
CH = Switzerland
FI = Finland
IT = Italy
PL = Poland
SI = Slovenia
AT, DE
I3B/P (50)
Butane @ 50mbar
@ 50mbar
3kW
74
Publicité
