Publicité
TRANSPORT AND HANDING
When transportation, hold the base and lift the refrigerator
carefully with an angle inferior at 45 degree. Never hold the
door handle as support. Never place it upside down nor
horizontally. Push refrigerator on its basis and place it thanks to
its roller feet.
INSTALLATION
This refrigerating appliance is not intended to be used as a
built-in appliance.
To fix stably, the appliance must be placed on a flat and solid
surface. It should not be laid on any soft material.
Choose a location where there is no heat source. Keep the
refrigerator away from direct sunlight or other appliance
producing heat.
Choose a dry and well-ventilated place where there is no
corrosive air.
In order to improve efficiency of the cooling system and save
energy, it is necessary to maintain good ventilation around the
appliance for the dissipation of heat. For this reason, sufficient
clear space should be available around the refrigerator.
The appliance is supplied with two plastic spacers. After
installation of these spacers, the appliance cannot be pushed
against the wall to maintain proper ventilation. Insert the
spacers into the relevant openings on the back of the appliance,
then screw the spacers tightly. Place the appliance against a
wall with a free distance that not exceeding 75 mm but more
than 50mm.
-38-
Publicité
