Télécharger Imprimer la page

Zoofari ZTSD 36 C2 Instructions D'utilisation Et Consignes De Sécurité page 20

Publicité

the adjustment switch
differ by 0.3 mm.
Through removal of the trimming guide
using only the cutting head
cut clean contours.
Example:
Use the trimming guide 3.0 mm
the following settings of adjustment
switch
(trim length 3.9‒4.8 mm):
4
On adjustment switch
The shorter trim length (0.9 mm):
short hair (3.9 mm)
Trimming guide
Cleaning and care
DANGER! ELECTRIC SHOCK!
Before cleaning, remove the plug from the
mains power socket.
CAUTION! PROPERTY DAMAGE!
NEVER submerse the product in water or other
liquids.
Do not use any corrosive or abrasive cleaning
agents.
Clean the housing using a damp cloth and a
mild detergent.
Switch the product off by sliding the ON / OFF
switch
to the "0" position.
5
Remove the plug from the mains socket.
Remove the trimmer guide
head
from the product (see Fig. E and F).
1
Note: Put the blade cover
head
before removing it from the product.
1
20 GB/IE
. These gradations
4
, i.e.
6
itself, you can
1
with
6
:
4
(mm)
6
3.0
6.0
9.0
12.0
or the cutting
6
on cutting
7
After use, switch the product off by sliding
the ON / OFF switch
Middle trim length (1.2 mm / 1.5 mm):
mid-length hair (4.2 mm / 4.5 mm)
The longer trim length (1.8 mm):
long hair (4.8 mm)
(See the table below for all the length adjustments.)
Trim length with accurate trim adjust-
ment by adjustment switch
0.9
1.2
3.9
4.2
6.9
7.2
9.9
10.2
12.9
13.2
Note: Never untighten the screws on cutting
head
.
1
Wash the trimmer guide
head
with running water if necessary.
1
Dry the trimmer guide
Remove any remaining bits of hair from the
cutting head
and product by using the
1
cleaning brush
provided (see Fig. G and H).
8
Apply one or two drops of blade oil
between the blades and the moving parts
(see Fig. I).
Adjust the adjustment switch
after you have finished cleaning the product,
before install back the cutting head
product with click sound (see Fig. J).
Note: Clean the cutting head
guide
after every use.
6
to the position "0".
5
(mm)
4
1.5
1.8
4.5
4.8
7.5
7.8
10.5
10.8
13.5
13.8
or the cutting
6
and cutting head
.
6
1
9
to 1.8 mm
4
to the
1
, trimmer
1

Publicité

loading

Ce manuel est également adapté pour:

340720 1910