Publicité
Do not place the product on
hot surfaces, near hot surfaces
or near an open fire.
To prevent impermissible heating
do not cover the plug and the
product during use.
Do not use any corrosive or
abrasive cleaning agents.
Keep the blade oil out of reach
of children. Do not ingest the
blade oil, do not get it into your
eyes. Keep it in a safe place if it
is not being used.
Before use
Remove all parts from the package.
Oiling the blades
It is recommended that you oil the blades before
first use and after cleaning to guarantee complete
functionality.
Apply one or two drops of blade oil
ween the blades and distribute them evenly
(see Fig. I).
Wipe away any excess oil using a cloth.
You can also use any acid-free oil such as
sewing machine oil.
Operation
Changing the attachments
(Fig. C‒E)
Remove the blade guard
head
.
1
Place the required trimming guide
prongs facing upwards on the cutting head
bet-
9
from the cutting
7
with the
6
and thereby press the flap of the trimming
1
guide
down firmly onto the lower metal
6
edge of the cutting head
Ensure that the trimming guide
engaged with "click" sound before starting to cut /
trim the fur (see Fig. E).
Setting the trim length
To set different trim lengths, hold the main body
of the product slide the adjustment switch
into the desired position (0.9‒1.8 mm). The set
trim length will be displayed on adjustment
switch
.
4
1. Select a shorter trim length: Slide the ad-
justment switch
trim length is 0.9 mm (see Fig. A).
2. Select a longer trim length: Press and hold
the safety lock
switch
downwards. The longest trim
4
length is 1.8 mm (see Fig. A).
It is suggested to start with fine adjustment
switch
at 1.2 mm to experience the optimal
4
handling.
Trimming fur
Note: The fur being trimmed should be clean,
dry and untangled.
Carefully comb the fur to disentangle any
potential knots.
Begin by using the longer trimming guides
and trim the fur gradually to the desired length.
It is advisable to first trim a small area so as
to test the individual trimming guides
Avoid making sudden movements when trimming.
Switch the product on by sliding the ON / OFF
switch
to the "I" position.
5
Slowly run the product through the fur against
the direction of hair growth. Hold the product
so that the trimming guide
sible against the animal.
You can graduate the desired trim length of the
trimming guides
6
(see Fig. C and D).
1
has properly
6
upwards. The shortest
4
and slide the adjustment
3
.
6
is as flat as pos-
6
more accurately by sliding
GB/IE
4
6
19
Publicité
