Publicité
2
Filling the Water Tank
• Remove the top cover of the water tank.
• Fill the tank up only with drinking water.
• Mount the top cover back on the water tank.
Important:
Do not use the water dispenser for anything except water.
Important:
If you leave water in the tank for a long time, it will cause an odor. In this
case, clean the tank and keep using it.
Important:
Clean the water tank before using it for the first time.
Cleaning the Water Tank
• Lift the water tank.
• Remove the tank cover.
• Clean the tank with warm water and reassemble the pieces that you have removed.
Stowing the Water Tank
• Install the water tank as shown.
• Make sure that the tap and the hole match each other while installing.
• Water flow may not be as expected if the tank has not been installed properly. Also check that
the gaskets have been assembled properly.
Please hold the glass momentarily after distribution to avoid drips.
1. Place the water tank in the plastic holder on the
door, in the direction of
the arrow on the diagram.
2. After you have mounted the water tank, push it
down to firmly secure it in the holder.
1
3. Add your drinks with the help of the water tank top
cover. Pull up the water tank cover to remove it.
4. Gently press the valve lever to serve your drinks.
3
4
EN 6
Publicité
