Publicité
Positioning The Appliance
Positioning The Appliance
Position the appliance in the desired location. The back should rest against the
Position the appliance in the desired location. The back should rest against the
wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher
wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher
is equipped with water supply and drain hoses that can be positioned either to the
is equipped with water supply and drain hoses that can be positioned either to the
right or the left sides to facilitate proper installation.
right or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling,
the height of the dishwasher may be altered
via adjustment of the screwing level of the feet.
In any case, the appliance should not be inclined
more than 2°.
Free Standing Installation
Positioning The Appliance
Fitting between existing cabinets
The height of the dishwasher, 845 mm,
has been designed in order to allow the
machine to be fitted between existing
cabinets of the same height in modern
fitted kitchens.
The laminated top of the machine does not
require any particular care since it is heatproof,
scratchproof and stainproof.
Underneath existing work top
(When fitting beneath a work top)
In most modern fitted kitchens, there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case
remove the work top of the dishwasher by
unscrewing the screws under the rear edge of the
top (a).
Attention
After removing the work top, the screws must be screwed again under
the rear edge of the top (b).
- 34-
a
a
b
b
Publicité
