Publicité
Water Supply and Drain
Cold water connection
Connect the cold water supply hose to a
threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
If the water pipes are new or have not
been used for an extended period of time,
ordinary supply hose
let the water run to make sure that the water
is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage
the appliance.
WARNING
A hose that attaches to a tap can burst if it is installed on the same water line
as the dishwasher. If your sink has one, it is recommended that the hose be
disconnected and the hole plugged.
- 32-
Publicité
