Caring For The Dishwasher
Frost precaution
Please take frost protection measures on the dishwasher in
winter. Every time after washing cycles, please operate as follows:
1. Cut off the electrical power to the dishwasher at the
supply source.
2. Turn off the water supply and disconnect the water inlet
pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use
a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a
sponge to soak up water in the sump.
After every wash
After every wash, turn off the water supply to the appliance
and leave the door slightly open for a while so that moisture
and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove
the plug from the socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Only use a
cloth with warm soapy water.
To remove spots or stains from the surface of the interior, use
a cloth dampened with water and a little vinegar, or a cleaning
product made specifically for dishwashers.
- 29-