Télécharger Imprimer la page

Ryobi RY36LMX46A Mode D'emploi page 7

Publicité

After each use, clean the plastic parts with
a soft, dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
The blade on the product is sharp. Use extreme
caution, and wear heavy-duty gloves when fitting,
replacing, cleaning, or checking bolt security.
The blade bolts must be adequately tightened.
See the manufacturer's recommendations
for blade bolt torque, which can be found in
the product specification table in this manual.
CLEARING BLOCKAGES
Turn off the product, and remove the isolator
key and the battery pack. Make sure that all
moving parts have come to a complete stop.
Always wear heavy-duty gloves when
checking or clearing a blockage. The blades
are sharp, and the blockage itself could be
a sharp object.
Remove the grass catcher. Check and carefully
clear the grass catcher for obstructions.
Check the grass discharge chute, and
carefully clear blockages.
Turn the product on its side. Check its
underside and the area around the blade.
Carefully remove any blockages. Remember
that the blade may move during cleaning.
KNOW YOUR PRODUCT
See page 169.
1.
Speed adjustment slider (RY36LMXSP46A
only)
2.
Self-propel lever (RY36LMXSP46A only)
3.
Interface board
4.
Start button
5.
On/off lever
6.
Telescopic handle
7.
Operator's manual
8.
Handle lock lever
9.
Isolator key
10. Grass catcher full indicator
11. Height adjustment release key
12. Quick-release fastener
13. Grass catcher
14. Battery door
15. Blade lock
16. Rear wheel
17. Front wheel
18. Mulching plug
19. Battery pack
20. Charger
SYMBOLS ON THE PRODUCT
Read and understand all
instructions before operating the
product. Follow all warnings and
safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate the product on
inclines greater than 15°. Mow
across the face of slopes, never
up and down.
Do not expose the product to
rain or damp conditions.
Beware of sharp blades.
Blades continue to rotate
after the motor is switched off .
Remove the isolator key before
maintenance.
Beware of thrown or fl ying
objects. Keep all bystanders,
especially children and pets,
at least 15m away from the
operating area.
Go
Stop
European Conformity Mark
British Conformity Mark
EurAsian Conformity Mark
Ukraine Conformity Mark
Guaranteed sound power level
7
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Publicité

loading

Ce manuel est également adapté pour:

Ry36lmxsp46a