Using the gliding rack
The fully extendable Gliding rack makes food preparation easier, especially when
you are preparing heavier dishes. The Gliding rack has 2 glide tracks that allow
you to extend the rack well out of the oven without touching the sides of the oven
walls.
Installing the Gliding rack
Rack
Rack
Guides
Guides
DOB30x977Sx_AA_DG68-01312A-01_EN+MES+CFR.indb 35
DOB30x977Sx_AA_DG68-01312A-01_EN+MES+CFR.indb 35
•
With the Gliding rack in the Closed
position and the oven off, carefully
insert the Gliding Rack between the
guides until the rack reaches the back.
When using the Gliding rack in the
•
oven, be sure to pull on the handle of
the rack only to slide it in and out. If
you grasp the frame while using the
rack, the entire Gliding rack will be
removed. Make sure you use oven mitts
when handling the Gliding rack during
cooking.
Removing the Gliding rack
•
Do not install the Gliding rack directly above
the Wire rack.
You will not be able to install it properly
and the rack could fall.
NOTE
You can install the Gliding rack in any rack positions except the lowest rack
position in the oven (level 1).
With the Gliding rack in the Closed
position and the oven off and cool,
grasp the rack and frame and pull both
forward to remove.
CAUTION
English 35
2023-02-22 오후 9:34:30
2023-02-22 오후 9:34:30