Publicité
Provided that no prohibited sub-
stances are present, the contents of
the dust container can be disposed of
with normal household waste.
Hold the dust container close to the
bin to prevent dust from billowing out.
Press the release button on the bot-
tom of the dust container.
The flap will open and the dust will fall
out.
If dust balls, hair or coarse debris do
not fall out, remove the pre-filter by
pulling it downwards (see the following
section: "Cleaning the dust container
and pre-filter").
Close the dust container flap, making
sure it clicks into place.
Cleaning the dust container and pre-
filter (Fig. 35, 36 + 37)
Clean the dust container and pre-filter
as required.
Empty the dust container over a bin.
Remove the pre-filter by pulling it
downwards (Fig. 35).
Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not clean the pre-filter with water.
Do not use pointed or sharp-edged
objects to clean the filter.
Clean the dust container and pre-filter
with a dry cloth or with a cleaning tool
which is located on the side of the
PowerUnit (Fig. 36).
Reinsert the cleaned pre-filter into the
cleaned dust container as far as it will
go (Fig. 37).
Close the dust container flap, making
sure it clicks into place.
Cleaning the fine dust filter
(Fig. 33 + 38)
Clean the fine dust filter thoroughly at
least once every 3 months outside the
PowerUnit.
Risk of damage caused by incor-
rect cleaning.
The fine dust filter can become dam-
aged and be less effective as a result.
Do not clean the fine dust filter with
water and avoid cleaning the inside.
Do not use pointed or sharp-edged
objects to clean the filter. Do not
brush the fine dust filter (not even
with the cleaning tool supplied).
Press both release buttons at the side
of the fine dust filter lid and remove
the fine dust filter by pulling it up-
wards (Fig. 38).
Hold the fine dust filter over a bin.
Take hold of the black section of the
fine dust filter underneath the screw
cap and turn the screw cap 10 times
through 180° (Fig. 33).
When turning the cap, you will hear a
noise, which is a normal part of how the
ComfortClean self-cleaning function
works.
Empty the fine dust filter by carefully
tapping the lower edge.
Turn the fine dust filter slightly while
you do this to free the dirt from all of
the crevices.
en
55
Publicité
