Publicité
Introduction
System overview
The robotic cleaner sweeps the pool floor and walls collecting dirt and
debris in its filters. This user manual explains how to operate the robotic
cleaner, including cleaning, maintenance and storage procedures.
Note: This manual reviews several different models with variations in
components.
Robotic cleaner operation
Once the robotic cleaner is placed in the pool and activated, it operates
according to its program. It moves along the floor and walls of the
pool, covering the entire area of the pool floor and walls. When it has
finished its program, it remains inactive on the pool floor. Power will
automatically shut off. Note: It's not recommended to stop the pool
cleaner prior to cycle end.
Note: Wall climbing is an optional feature. When the wall climbing
feature is enabled, the robotic cleaner climbs the wall at intervals
according to its internal program. Its ability to climb over stairs in
swimming pool is subject to stair geometry and material.
Operating conditions
The robotic cleaner is intended for use in residential swimming
pools only and in the following conditions: (1) Recommended water
temperature 22°C-32°C (72°F-90°F). (2) Water pH : 7.2 - 7.6 (3)
Chlorine level: pool is maintained according to the pool manufacturer's
instructions. (Recommended Chlorine level: 2-4 ppm) Note: Failure to
maintain the pool according to the recommended operating conditions
could prevent the robotic cleaner from functioning properly.
2
COSMY THE BOT |
100
|
150
|
200
|
250
| ROBOTIC POOL CLEANERS
Components
Power
cable
Robotic
pool
cleaner
Power
supply
Cart
(optional)
Publicité
