Publicité
CONNECTING AN ELECTRIC DRYER
(Skip for gas dryers and if your dryer already has a power cord attached)
TOOLS YOU WILL NEED
Slip-joint pliers
Flat-blade
screwdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
3/4" Strain relief
(UL recognized)
4" Duct clamps (2) or
4" spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL listed
flexible metal duct
(if needed)
Installation Instructions
Phillips
screwdriver
Level
Gloves
Exhaust hood
UL listed aluminum foil
tape
Appliance power cord
kit (not provided with
appliance)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type
as per the house
receptacle before
purchasing line cord.
4" Cover Plate
(Kit WE49X22606)
(if needed)
Before making the electrical connection, turn off the
circuit breaker(s) or remove the dryer's circuit fuse(s) at
the electrical box. Be sure the dryer cord is unplugged
from the wall. NEVER LEAVE THE ACCESS COVER
OFF THE TERMINAL BLOCK.
WARNING
Disconnect power supply before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
POWER CORDS
GE Appliances strongly recommends the use of
factory specified parts. Select the power cord to fit your
installation requirements.
NOTE: If your dryer circuit is on a circuit protected by a
GFCI breaker, then 3-wire installation is not permitted.
House wiring and dryer must be configured for 4-wire.
Part Number
Type
WX9X2
3-Prong
WX9X3
3-Prong
WX9X4
3-Prong
WX9X18
4-Prong
WX9X19
4-Prong
WX9X20
4-Prong
Order on-line at GEApplianceparts.com today,
24 hours a day or by phone at 877.959.8688 during
normal business hours. In Canada, visit your local
GE Appliances parts distributor or call 800.661.1616 or
GEAppliances.ca/en/products/parts-filters-accessories.
9
- Electrical Shock Hazard
Length
Amperage
4 ft. (1.2 m)
30
5 ft. (1.5 m)
30
6 ft. (1.8 m)
30
4 ft. (1.2 m)
30
5 ft. (1.5 m)
30
6 ft. (1.8 m)
30
Publicité
