Publicité
6. Maintenance
ATTENTION: Before performing any maintenance tasks, disconnect the electrical device from the
power source by pulling the plug out of the socket outlet.
Do not use aggressive solvents or cleaning agents.
Do not dispose of pool water containing chemicals (e.g. chlorine) on lawns or plants.
•
Disconnect the device from the power source.
•
Place the cleaner on a flat surface and remove the cover of the robot by opening the two clips (one on
each side) (Fig. 6).
•
Please remove all dirt and water from inside the pool robot.
•
Also clean the filter collection bag regularly and thoroughly by removing it and rinsing it turned inside out
(Fig. 7 + 8).
•
The cleaning intervals depend on the degree of soiling of the water.
•
Reassemble the device in reverse order to be able to use it again.
Fig. 6
Fig. 7
Note: All types of repairs must be carried out by qualified personnel.
14
Fig. 8
6
Translation of the Original Operating Instructions
Publicité
