Trailfx 4811H Instructions De Montage

Part Numbers:
PUTTY KNIFE MAY BE NEEDED FOR SPECIFIC APPLICATIONS.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
Before driving, ensure that the window vents are properly secured to vehicle.
Do not use automatic "brush style" car washes as window vents may accidentally be pulled off the vehicle.
Do not use cleaning solvents of any kind on the acrylic surface of the window vents to avoid accidental damage.
Periodically check the window vents to ensure they remain securely fastened to the vehicle.
NOTE: Actual product may vary from illustration.
Front Driver
Side Vent
Front Driver Front Passenger
Side Vent
Car Wash Supplies
A trial fit is recommended to ensure proper positioning and fit.
Check fit of parts before painting as we will not accept the return of modified or painted parts.
Wash your vehicle to remove any dirt or grime from the area where the hood protector will be attached
and dry thoroughly with a clean towel.
Page 1 of 7
Tape On Style Window Vents
Important Safety Information
Front Passenger
Side Vent
Rear Driver
Side Vent
Side Vent
Clear Towel
Preparation Before Installation
Q
Contents - 2 Piece Set
Alcohol
Pad
Alcohol Pad
Contents - 4 Piece Set
Rear Passenger
Side Vent
Tools Required
Alcohol
Pad
Alcohol Pad
C
CUTTING NOT
30-60 min
REQUIRED
support@trailfx.com
1 866 638 4870
LIMITED LIFETIME
K-520 Primer Adhesion Promoter
General Information
3M K520 is a type of adhesion promiting primer which
provides a superior adhesion( PP) etc...
Adhesive Promoter
K-520 Primer Adhesion Promoter
Alcohol
General Information
3M K520 is a type of adhesion promiting primer which
Pad
provides a superior adhesion( PP) etc...
Alcohol Pad Adhesive Promoter
K-520 Primer Adhesion Promoter
General Information
3M K520 is a type of adhesion promiting primer which
provides a superior adhesion( PP) etc...
Adhesive Promoter
www.TrailFX.com
DRILLING NOT
REQUIRED
Rev R01;101620