Publicité
Problem
Door seal fails are
not tight
Water pan overflows
EN
Hot housing
Surface
condensation
• Remove any objects on the door seal
• Heat the door seal and then cool it for restoration (or blow it
with an electrical dryer or use a hot towel for heating)
• There is too much food in the compartments or food stored
contains too much water, resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due to
entry of air and increased water due to defrosting
• Heat dissipation of the built-in condenser via the housing,
which is normal. When housing becomes hot due to high
ambient temperature, storage of too much food or event of
shutdown of the compressor , allow sufficient ventilation to
facilitate heat dissipation
• Condensation on the exterior surface and door seals of the
refrigerator is normal when the ambient humidity is too high.
Just wipe the condensate with a clean towel
16
Possible reason
Publicité
