Télécharger Imprimer la page

JANE GO UP Mode D'emploi page 31

Publicité

the height of the hooks (8) by pressing the metal button on the
underneath of the hooks.
arms into the required position.
Make sure that both arms are the same distance from the
centre of the platform and that the hooks are correctly
fastened through the rings.
The Go Up platform is now ready for use.
WARNING: Never fold the pushchair with the platform still
!
attached. If you want to fold the pushchair you must first
detach the platform and just leave the rings fastened on
the chassis.
Once you have connected the Go Up to the pushchair, you
need to check the functioning with one child on the Go Up and
another child sitting in the pushchair. The child on the Go Up
must be comfortable and you have to be able to handle the
pushchair easily. You may have to adjust the Go Up placing the
platform nearer or further away from the pushchair.
When it is correctly fitted in place, cut the toothed straps (5)
as close as possible to the connector ring (7) and smooth the
edges to avoid any scratches.
IM01979 Plataforma Go Up.indd 31
All manuals and user guides at all-guides.com
3e
Lock the cams (9) to fasten the
3f
3g
G. DETACHING THE PLATFORM
Press the buttons (10) found under the hooks (8) to open them and dis-
4a
connect them from the rings.
If you want to take the rings off the pushchair chassis, turn the ring an-
ticlockwise and release the toothed strap and the connector
H. RESTING POSITION
Go Up is fitted with an adjustable strap (11) so it can be folded away
when not in use.
5a
Fasten the strap onto the right side tube of your pushchair. Insert the
elastic band through the buckle as shown in diagram
the elastic band in the clip underneath the platform
length of the strap with the buckle if necessary.
To unfold, release the elastic band from the platform clip.
I. MAINTENANCE
Keep the metal parts clean and dry to prevent them from getting rusty.
Lubricate the mobile parts regularly with silicone spray.
Do not use oil or grease. To clean the plastic parts just use a mild de-
tergent and warm water. For your safety and for correct maintenance
it is advisable to take your product to one of our official repair shops
for regular inspections.
ring.4b
5b
and secure
. Adjust the
5c
5d
EN
31
28/6/17 10:59

Publicité

loading