Publicité
12 Press the OK button.
On the display, the time flashes at which the smart thermostat head must switch
on for the first time.
13 Repeat the previous 7 steps to set the second and third point in time and the
corresponding temperature..
Repeat the above steps when you want to set the other days.
• On the home screen, repeatedly press the Menu button until 'AUTO' appears.
The set week programme now applies.
Notice! As soon as manual settings are enabled (Manu), the week programmes are
disabled.
7.1.4.2
Setting holiday programmes
1 On the home screen, repeatedly press the Menu button until
On the display the time is flashing. The temperature setting changes after this
period of time to the set holiday position.
2 Set the preferred time by turning the dial button.
3 Press the OK button.
The date flashes.
4 Set the day by turning the dial button.
5 Press the OK button.
6 The temperature flashes.
7 Set the desired temperature for the holiday period by turning the dial button.
8 Press the OK button.
Tip! Press the Menu button to temporarily terminate the holiday programme.
7.1.5
Switching child lock system on or off
Switching on
1 Press the Menu button and the
'LOC' appears on the display. The child lock system has now been enabled. The
product does not respond when the buttons are pressed or when the dial button is
turned.
Switching off
2 Press the Menu button and the
system is engaged.
'LOC' disappears from the display. The child lock system has now been disabled.
7.1.6
Setting temperature protection in case of ventilation
The smart thermostat head has a temperature protection modus in case of ventilation. When a
26 User maual –wireless climate control
All manuals and user guides at all-guides.com
appears.
button simultaneously.
button simultaneously when the child lock
decrease in temperature of 1.5 °C is detected within 3 minutes, the thermostat head switches
to a low temperature. The smart thermostat head remains at this low temperature for a certain
amount of time.
1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'AEr' by turning the dial button.
3 Press the OK button.
On the display, the minutes flash during which the temperature remains low.
4 Set the number of minutes by turning the dial button.
5 Press the OK button.
On the display the temperature is flashing. The smart thermostat head switches to
this temperature when ventilation has been detected.
6 Set the temperature by turning the dial button.
7 Press OK to confirm.
7.1.7
Adjusting the date and time
1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'dAT' by turning the dial button.
3 Press the OK button.
The year appears.
4 Turn the dial button to set the year.
5 Press OK to confirm.
6 Turn the dial button to set the month.
7 Press OK to confirm.
8 Turn the dial button to set the day.
9 Press OK to confirm.
10 Turn the dial button to set the hour.
11 Press OK to confirm.
12 Turn the dial button to set the minutes.
13 Press OK to confirm.
The date and time have been adjusted. Press the Menu button to return to the
home screen.
7.1.8
Set a temperature correction
If you use the smart thermostat head in combination with a wall thermostat, then the wall
thermostat determines the room temperature. It is thus possible that it is colder or warmer
elsewhere in the room. To compensate for this, a temperature variance can be set.
For example: when your wall thermostat measures 22 degrees and the smart thermostat head
measures 24 degrees, then you can adjust the smart thermostat by 2 degrees.
Proceed as follows:
1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'tOF' by turning the dial button.
User manual – wireless climate control kit 27
Publicité
