Publicité
Operating instructions
Water timer
Item no. 2384970
Intended use
The product is intended for connection to a suitable water tap. The point of time and duration of watering
can be programmed. Only clear, clean fresh water is allowed as the pumped liquid. The temperature of the
pumped liquid must not exceed +38 °C. Operation requires two batteries of the type AAA/Micro (not included,
can be ordered separately).
For safety reasons, you may not convert and/or alter the water timer. Using the water timer for purposes
other than those described above may damage the components. Read the operating instructions carefully
and store them in a safe place. Make the water timer available to third parties only together with its operating
instructions.
This product complies with statutory national and European regulations. All company names and product
names are trademarks of their respective owners. All rights reserved..
Delivery content
• Water timer
• Quick-release coupling
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and observe in particular the safety instructions.
If you do not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal injury or dam-
age to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy for
children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, flammable gases,
vapours and solvents. Do not place the product under any mechanical stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Only clear, clean fresh water (temperature max. +38 °C) is allowed as the pumped liquid. The
product is not suitable for controlling the conveyance of drinking water and is not suitable for
controlling the conveyance of corrosive/caustic, flammable or explosive liquids (e.g. petrol,
heating oil, cellulose thinner), fats, oils, salt water or waste water from toilet facilities.
• Check the product for damages before each use. If you discover any damages, you must not
use the product.
• In the place of operation the ambient temperature must not be around or under the freezing
point (<0 °C). Otherwise, the water in the product will freeze, with the resulting ice build-up
causing the product to destruct. Store the product in a dry place above freezing point during
winter.
• Also observe the safety and operating instructions of any other devices that are connected to
this product.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Battery information
• Operation with rechargeable batteries is possible. However, the operating time is reduced by
the lower voltage (battery = 1.5 V, rechargeable battery = 1.2 V). Therefore, we recommend
operating the product only with high-quality alkaline batteries to ensure long and reliable op-
eration.
• Keep batteries/rechargeable batteries out of reach of children.
• Do not leave batteries/rechargeable batteries lying around; they could be swallowed by chil-
dren or pets. Seek immediate medical attention if a battery is swallowed. Risk of death!
• Always ensure that the batteries are inserted in the correct polarity (observe the plus/+ and
minus/- symbols).
• Make sure that batteries/rechargeable batteries are not short-circuited, dismantled or thrown
into a fire. This may cause a fire or explosion!
• Never attempt to recharge non-rechargeable batteries, as this may cause an explosion. Only
charge rechargeable batteries; use a suitable battery charger.
• Old or flat batteries can leak liquid chemicals that may damage the product. If not used for a
longer period (e.g., in case of storage), remove the inserted batteries/rechargeable batteries.
• Contact of leaking or damaged batteries/rechargeable batteries with the skin can cause acid
burns; therefore, use suitable protective gloves.
• Liquids leaking from batteries/rechargeable batteries are chemically highly aggressive. Objects
or surfaces coming into contact with these liquids could be severely damaged. Therefore, keep
batteries/rechargeable batteries in a suitable location.
• Always replace the complete set of batteries/rechargeable batteries. Do not mix non-recharge-
able/rechargeable batteries with different charges (flat and half-discharged non-rechargeable/
rechargeable batteries).
• Use either 2 batteries or 2 rechargeable batteries; never mix standard batteries with recharge-
able batteries. Use only non-rechargeable/rechargeable batteries of the same model and type
and from the same manufacturer.
• For the correct disposal of batteries, please read the chapter "Disposal".
Controls
1 Coarse filter
2 Union nut for connection to the water tap
3 Thumb wheel
4 Connection for hose
5 LCD Display
6 "DELAY/+" button
7 "–" button
8 "OK/MANUAL" button
9 Battery compartment cover
Inserting batteries, replacing batteries
• Remove the battery compartment cover by sliding it backwards.
• Insert two AAA/Micro batteries into the battery compartment, paying attention to the correct polarity (ob-
serve positive/+ and negative/-). The respective figure in the battery compartment will help you ensure that
you have the correct polarity.
• After inserting the batteries, all display segments will appear briefly, after which the water timer is ready
for operation.
• Close the battery compartment again. Ensure that the sealing ring on the battery compartment cover is
in the correct position.
• The batteries will need to be replaced if the display contrast fades sharply or the symbol for the battery
status indicator (top right of the display) no longer shows a line or flashes.
Connection to a tap
The water timer can be programmed, even if it is not yet connected to the water tap.
• If a quick-release coupling is attached to your garden tap, remove it.
• Check the correct positioning of the coarse filter in the union nut.
• Then, hold the water timer firmly while you tighten the union nut to the garden tap.
Depending on the existing water tap and its thread, the supplied adapter ring may need to be
used.
Do not cant the thread, otherwise it will be damaged! Tighten the swivel nut by hand; do not use
any tools! Otherwise, the swivel nut may be damaged; loss of warranty!
• You can connect the garden hose to the outlet; if necessary, use a quick-release coupling.
Operation
a) Selecting function
Use the thumb wheel (3) to select the desired function. The direction of rotation is irrelevant.
• "OFF": Water timer switched off
• "ON": Water timer switched on
• "HOW OFTEN": Set the watering interval
• "HOW LONG": Set the watering time
• "START TIME": Set the start time for the first watering process
• "SET CLOCK": Set the time
b) Setting the time ("SET CLOCK" function)
• Turn the thumb wheel (3) to the "SET CLOCK" position. "12h" or "24h" is displayed for the time format.
• Use the "DELAY/+" (6) or "–" (7) button to switch between the "12h" or "24h" time format.
• Press the "OK/MANUAL" button (8) to confirm the time format and switch to setting the hours and minutes.
• Adjust the hours/minutes by pressing the "DELAY/+" (6) or "–" (7) button. For a quick adjustment, keep the
corresponding button pressed longer.
In the 12-hour format, "AM" is displayed to the right of the time for the first half of the day
and "PM" for the second half of the day.
• Exit the setting mode by using the thumb wheel to select another function (e.g. "OFF").
c) Setting the watering interval ("HOW OFTEN" function)
• Turn the thumb wheel (3) to the "HOW OFTEN" position. The currently set watering interval appears.
• Set the desired watering interval by pressing the "DELAY+" button (6) or "–" button (7). For quick adjust-
ment, press and hold the corresponding button for longer.
The watering interval can be a minimum of 1 hour and a maximum of 7 days.
The minimum duration depends on the set watering time (see next section).
For example, if you have set a watering time of 2 hours, you can set the watering interval to a
minimum of 3 hours.
• Exit the setting mode by using the thumb wheel to select another function (e.g. "OFF").
Publicité
