Publicité
INNOVATIVE ORBITAL SOLUTIONS
Return to starting position:
Resume welding :
Join
experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
When cycle is finished, you can to choose
to return at the starting position (this is
done automatically with closed head,
except if there is an alarm). With SATO,
you can use machine buttons: Y for yes
and N for no.
If the weld has been interrupted, the
system offers to resume the weld to
complete it.
If you have pressed the "resume welding"
button, the system suggests that you
automatically return to the place where the
weld was interrupted minus an angle to be
defined (10 ° by default).
If you press no, you exit the recovery
process.
The position of the machine can be
manually adjusted before restarting the
weld.
Then press Start to restart the weld or no to
exit the restart procedure.
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
- 81 -
Publicité
