Publicité
1
Signs and symbols
2
Product information
Model
FM 800
FM 1000
FM 1000 NC-ER
FM 1000 NC-WS
2.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218, e-mail: mafell@mafell.de
2.2 Machine identification
All details required for machine identification are available on the attached rating plate.
This symbol is found in all places where you will find information for your
safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get damaged.
This symbol indicates tips for the user and other useful information.
Protection class II
CE symbol to document compliance with the basic safety and health requirements
according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of milling motors together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete milling motors
must be collected separately and recycled in an environmentally-compatible
manner.
To reduce the risk of injury, please read the operating instructions.
Art.-No.
9M0010, 9M0030, 9M0031
9M0001, 9M0020, 9M0021, 9M0023
9M1401
9M1301
-22-
Publicité
