Ordering Replacement Parts; Disposal And Recycling - EINHELL 34.104.40 Mode D'emploi D'origine

Anleitung_BG_CG_3_6_Li_SPK7__ 25.09.14 09:57 Seite 13
7.2 Maintenance
To achieve good results you should keep the
n
blades sharp at all times. In particular we
recommend that you immediately level off any
jags or ridges caused by stones or the like. The
tool should be thoroughly cleaned both before
and after use.
There are no parts inside the equipment which
n
require additional maintenance.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
n
Article number of the machine
n
Identification number of the machine
n
Replacement part number of the part required
n
For our latest prices and information please go to
www.isc-gmbh.info
Grass cutter blade: 341044001001
Hedge cutter blade: 341044001002

8. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
13