Publicité
2.Start the engine.
NOTE:
• The DC receptacle may be used while the AC power is in use.
• An overload DC circuit will trip the DC circuit protector (push button
comes out).
If this happens, wait a few minutes before pushing in the circuit
protector to resume operation.
Oil Alert system
The Oil Alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase falls below a safe limit, the Oil Alert system will
automatically shut down the engine (the engine switch will remain in
the ON position).
If the Oil Alert system shuts down the engine, the Oil Alert indicator
(red) will come on when you operate the starter, and the engine will
not run. If this occurs, add engine oil (see page 18).
OIL ALERT INDICATOR (RED)
42
Publicité
