Victron energy EasySolar 12/1600/70-16 230V Manuel page 31

Operating temp. range
Humidity (non condensing):
ENCLOSURE
Material & Colour
Protection category
Battery-connection
PV connection
230 VAC-connection
Weight
Dimensions (hxwxd)
STANDARDS
Safety
Emission / Immunity
Automotive Directive
1) Can be adjusted to 60 Hz and to 240 V
2) Protection
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230 VAC on inverter output
g. Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 °C ambient
5) Programmable relay which can be set for general alarm, DC undervoltage or genset start signal function
6a) If more PV power is connected, the controller will limit input power to 720 W resp. 1440 W.
6b) PV voltage must exceed Vbat + 5 V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1 V.
Common Characteristics
Three sets of MC4 (PV-ST01) PV connectors
EN 60335-1, EN 60335-2-29, EN 62109
EN 55014-1, EN 55014-2, EN 61000-3-3
29
-20 to +50 °C (fan assisted cooling)
max 95 %
aluminium (blue RAL 5012)
IP21
Battery cables of 1.5 meter
G-ST18i connector
11,7 kg
745 x 214 x 110 mm
2004/104/EC