Victron energy EasySolar 12/1600/70-16 230V Manuel page 22

5.5.3 Exemplary settings
Example 1 is the factory setting (since factory settings are entered by computer, all DIP switches
of a new product are set to 'off', except for DS-2).
DS-1 Panel option
DS-2 Panel option
DS-3 Ch. voltage
DS-4 Ch. voltage
DS-5 Frequency
DS-6 Search mode
DS-7 AC-in Limit
DS-8 Store setting
Example 1: (factory setting)
1 No panel or remote
switch connected
2 No panel or remote
switch connected
3, 4 GEL 14.4 V
5 Frequency: 50 Hz
6 Search mode off
7 AC-in Limit 12 Amp
8 Store setting: off→ on→ off
Store the settings (DS3-DS7) by changing switch ds-8 from 'off' to 'on', and then back to 'off'.
The LEDs 'charger' and 'alarm' will flash to indicate acceptance of the settings.
20
off DS-1
on DS-2
off DS-3
off DS-4
off DS-5
off DS-6
off DS-7
→ ←
DS-8
Example 2
1
2
3, 4
5
6
7
8 Store setting: off→ on→ off
off DS-1
on DS-2
off DS-3
on DS-4
off DS-5
off DS-6
on DS-7
→ ←
DS-8
Example 3
No panel or remote 1
switch connected
No panel or remote 2
switch connected
AGM 14,7 V 3, 4
Frequency: 50 Hz 5
Search mode off 6
AC-in Limit 4 Amp 7
8 Store setting: off→ on→ off
on
off
on
on
on
on
off
→ ←
Panel or remote
switch connected
Panel or remote
switch connected
Tubular plate 15 V
Frequency: 60 Hz
Search mode on
AC-in Limit 12 Amp