Publicité
TO OPERATE VACUUM CLEANER
NOTE: To reduce the risk of electrical shock, this vacuum cleaner has a polarized
plug, one blade is wider than the other. This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. DO NOT CHANGE THE
PLUG IN ANY WAY. Only use outlets near the floor.
OFF ON
Power Cord
ON-OFF Switch
Ensure ON-OFF switch is OFF.
Plug the power cord into 120V outlet.
ON position turns vacuum cleaner on.
OFF position turns vacuum cleaner off.
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
agitator when vacuum cleaner is on.
Contacting the agitator while it is
rotating can cut, bruise or cause
other injuries. Always unplug from
electrical outlet before servicing.
Use caution when operating near
children.
- 18 -
Remplacement de l'ampoule
de la lampe
Retirer la plaque inférieure.
Retirer la vis de la douille, puis retirer la
douille en la tirant vers le haut et en la
balançant de l'avant à l'arrière.
Enlever l'ampoule en la poussant dans
la douille et en la tournant dans le sens
anti-horaire.
Installer la nouvelle ampoule en la
poussant dans la douille et en la
tournant dans le sens horaire.
Ne pas utiliser une ampoule de plus de
130 V c.a.-15 W.
Remettre la douille en place dans le
boîtier en la poussant dans la fente de
montage et remettre la vis en place.
Remettre la plaque inférieure.
- 3
Publicité
