Publicité
interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.
Please consult your doctor and the manufacturer of your pacemaker
before using this heating pad.
• Do not pull, twist or make sharp bends in the cables.
• This heating pad must be examined frequently for signs of wear or
damage. If there are such signs, if the heating pad has been mis-used
or does not work, return it to the supplier before switching it on again.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualified persons in order to
avoid a hazard.
• While this heating pad is switched on
– never place any objects on it (e.g. suitcase or washing basket)
– never place any heat source on it (e.g. hot water bottle, heating pad
or similar).
• When in use, the electronic components in the controll of the heating
pad make the controll slightly warm. The controll should therefore
never be covered or placed on the heating pad when it is in operation.
• If you should have any questions about using our devices, please
contact Customer Services.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
12
•
English
Publicité
