Publicité
MOTOR
015
Unable to reach the required speed
If overloaded, please check your settings.
019
Release the trigger to clear
Welding start problem
020
Please check your welding parameters
Press and release the trigger to clear.
USB overload
024
Unplug your USB.
An internal system error has occurred.
-
Please restart your machine
-
Error during motor calibration
-
Error during calibration
-
No more memory space in the machine
Unsupported files %s
-
Err %d
Continue anyway?
-
Unable to save to the USB stick
Number of attempts exceeded.
-
Unlock code required
-
Wrong user code
If an unlisted error code appears or your problems persist, contact GYS Customer Service.
Warning icons
The alert icons at the top right of the screen provide you with more information about your product.
Warning
Meaning
Alert meaning the machine is in Demonstration mode.
Check your electrical installation (mains voltage).
Blocked cooling system.
Check the continuity of the torch's coolant flow.
End-of-life interface battery. Change the battery (CR2032) and update the [product's date and time (System / Clock).
The fan is not running at the right speed. Check the fan's condition.
Check the pressure settings of the motorised reel rollers.
Check that the filler wire is not blocked in the torch sheath.
If it is Impossible to reach the requested speed, calibrate the speed of
the motorised wire reels (Menu «Calibration»).
Check the power source's settings and the machine's installation (filler
wire, rollers, etc.)
If the problem persists, carry out an update (Via Planet GYS).
Check the power source's settings and the machine's installation (filler
wire, rollers, etc.)
If the problem persists, carry out an update (Via Planet GYS).
Change the USB stick.
Restart your machine by turning the machine off and on again.
If the problem persists, carry out update (via Planet GYS)
Recalibrate the motor reel speed (Menu «Calibration»)
Recalibrate the welding cables (Menu «Calibration»)
Delete Jobs to free up the internal storage space.
The data on the USB stick is corrupted.
Free up space on the USB stick.
If the problem persists, change the USB stick.
Enter unlock code: 314159
Wrong user code If the personal code is wrong, enter the correct
code. By default, this code is 0000.
9
Publicité
