Publicité
Users
The user mode enables the machine to be shared between several users. The first time that the machine is started, it
will be in Admin mode. The administrator can create user profiles. Each user has his own setup (mode, setting, process
and JOBs etc.) and this cannot be modified by another user. Each user needs a personal four-digit code in order to sign
in to the machine.
• The administrator has access to the entire general menu.
• Users have access to a simplified interface. Users do not have the ability to delete information (Tracking, Jobs, User
profiles, etc).
User configuration interface (reserved for the administrator).
The left side of the screen lists the users. The administrator has the ability to sort these users by name or by date by
quickly pressing button n°2. Pressing this button for a prolonged time will delete the active user(s) instead (although the
Admin account cannot be deleted).
On the right side of the screen, you can see the details of all the users previously created with the following information:
Avatar, Name, Team No. and Tolerance (%).
Creating a user profile
Press button n°3 to create a new user.
- User : Customise the user's name by pressing push button n°3.
- Avatar : Choice of avatar colour
- Team : Assignment of the team number (10 max)
- User code : personal access code (default 0000)
- Current setting tolerance I:
OFF : freely adjustable, the current setting is not limited.
± 0.0A : no tolerance, limiting the current (not recommended).
± 0.A> ± 50A : Setting interval at which the user can vary their current.
- Voltage setting tolerance U:
OFF : freely adjustable, the voltage setting is not limited.
± 0.0V : no tolerance, limiting the voltage (not recommended).
± 0.1V> ± 5.0V : setting range at which the user can vary the voltage.
- Wire speed setting tolerance (m/min) :
OFF : freely adjustable, the wire speed setting is not limited.
± 0.0m/min : no tolerance, limiting the wire speed (not recommended).
± 0.1m/min > ± 5.0m/min : the range of settings at which the user can vary the wire speed.
It is not possible to change the admin name or avatar for the «Admin» user.
Changing a user profile
Select the user on the left side of the screen and press the push button n°4.
Selecting users
If one or more user profiles are created, the user block displays all of the machine's users.
Select the user of your choice and press
The «Close» feature locks the machine on the user's choice so that no other settings are accessible. This screen
remains the same when the machine is switched on (OFF -> ON switch).
User display
The active avatar and username are displayed at the top left of the screen.
Unlocking code
Each user profile is protected by a personal, four-digit code. The default code will be 0000 if not changed. After failing to
correctly enter your personal code three times, the interface will be blocked and you will be asked for an unlock code.
This code is made up of six digits and cannot be changed. It is: 314159.
to confirm the choice.You will be asked for an unlock code.
5
Publicité
