FH-110704.1
PARTS DESCRIPTION
1.
Indicator light
2.
Thermostat control switch
3.
Heat select switch
4.
Air outlet grille
5.
Handle
Heat setting:
"O" position – OFF
– Ventilation
– WARM AIR (low heat output)
– WARM AIR (high heat output)
THERMOSTAT
1.
Rotate the switch to choose the suitable setting --- ventilation/ WARM AIR (low heat output)/ WARM
AIR (high heat output).
2.
Turn the thermostat to choose the temperature, the heater begins to work.
3.
The thermostat will turn the heater off when the selected room heating is achieved, and when the
temperature drops it will turn on again automatically.
Note:
You can adjust the angle of air outlet by pushing the handle forward or backward.
To switch off the appliance, it is recommended to turn the heat switch to ventilation setting for about
15 seconds to cool down. After that, please turn the heat switch to "O" position and then unplug the
appliance. This can help prolong the lifespan of the appliance.
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down
for at least 10 minutes. Put the plug in the socket and switch on the heater.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.
Before you clean the unit, turn off the switch. Remove the plug from the socket and wait until the fan
heater cools down completely.
Use a damp cloth to wipe the heater housing.
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the
appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 3000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has
occurred during production or transportation, please return the device to your dealer. In addition to
statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:
- 6 -
EN